Elija el lugar de entrega

La selección de la página del país/región puede influir en varios factores como el precio, las opciones de envío y la disponibilidad del producto.

Ver todas las localizaciones

Ir a www.igus.com

Novedades 2024 - 247 innovaciones con motion plastics

Sin mínimos de compra

Expo virtual y tour por nuestra fábrica en Alemania

Envío en 24 horas Cálculo de la vida útil Descarga directa de CAD

myigus

Carrito de la compra

(0)

Mi persona de contacto

igus® México S. de R.L. de C.V.

Boulevard Aeropuerto 160

Col. Corredor Industrial Toluca-Lerma

Toluca, C.P 52004

+52 728 2843185

Send message

See all contacts

MX(ES)

Save assembly time with the fastest to assemble e-chain®

... E4.1L ... Reduce assembly time ...

Fast harnessing saves time and money

igus® has developed a new innovative separator system for the E4.1L. This means that it is now very easy to insert shelves on several levels for interior separation according as needed. Visitors to HMI were able to try out for themselves how quickly and easily the new E4.1L can be filled. The new separator system has of course been tested in the igus® laboratory:

Innovative separator system

Installed in a dynamic test of the E4.48L

Comparison test

In a comparison test in the industry's largest laboratory in Cologne, which is owned by the company, igus® compared its E4.48L plastic e-chain® with a competitor's product. The two chains were evaluated with regard to load-bearing capacity in the case of unsupported lengths as well as in a breakage test and in respect of their behaviour when subjected to tensile forces:

Technical data

	igus® E4.48L	Competitor
Inner/outer height	48 mm/64 mm	40 mm/62 mm
Inner/outer width	105 mm/125 mm	67 mm/76 mm
Pitch	67 mm	76 mm
Weight per metre	1.73 kg	2,08 kg

Load bearing capacity in the case of an unsupported length

Test set-up: the two chains are suspended unsupported over a distance of 1.8 m with an additional weight of 5 kg/m.

Result: in relation to the neutral line, the competitor's chain sagged 6 mm deeper than the E4.48L.

Behaviour when subjected to tensile forces

Test set-up: the two chains are clamped in a rig in the test laboratory and tension is applied to both ends at the same time.

Result: the E4.48L withstands 86% more tensile force.

Breakage test

Test set-up: in the breakage test, the unsupported chain is subjected to a load from above. The additional load is increased until the chain breaks

Result: the E4.48L withstands 45% more additional load than the competitor's chain.